HOT ! CPC Package - 8 Mini Trees & 8 Tombstones \'Swap a Prop\' Package

Description

For non-modified use with RGBPlus sequences, the controller in this package must be connected to Network Aux A/Network 2. Each network in your show requires a USB485-HS Adapter (computer show) or an available port of a Showtime Director.

This package allows you to \"Swap a Prop\" depending on the holiday. (These 16 props are not meant to be used all at one time in the same display.) Use your 8 Tombstones at Halloween then change out to your 8 Mini Trees at Christmas, using the same Pixie8 controller and optional extensions. 

Our \"CPC\" packages include the \"Coro, Pixels, and Controller\" you need to easily add smart pixel props into to your display. These packages can be connected to an existing network of Gen3 Light-O-Rama Controllers, or used on a separate network within the same show. A Cat5 cable is required to connect this controller to existing controllers in a multi-controller network, or a computer/showtime director if it is the only Unit in the show.

S6.2.0 or higher is recommended for easiest use for personal sequence creation; a Pro license level is required to use Pixel Motion Effects. RGBPlus sequence requirements are listed per purchase page.

The Assembled Pixie8 controller includes the controller board and power supply wired and mounted in a weather-proof, ventilated and UL listed enclosure. The power supply is UL listed: MeanWell RSP-320-12 - 120/240V input - 12V - 26.7A output - with Power Factor Correction and extend temperature operating range. This is a 12 Volt controller system compatible with 12V RGB smart pixel strands and devices. Dumb RGB devices or standard LED / Incandescent lights cannot be plugged into the ports of this controller.

Included in this Package:

• 8 Mini Trees - 100 Nodes Each. 80 Nodes for Tree and 20 Nodes for Star. \"Pixel Path\" for pixel pushing included on the back of each prop.
  
  
  
  • 46\" high by 17.5\" wide
  
  
  • 10mm Green Coro with additional Yellow Coro for Star
  
  
  
  


• 8 RIP Tombstones - 100 Nodes Each. \"Pixel Path\" for pixel pushing included on the back of each prop.
  
  
  
  • 31\" tall by 19\" wide
  
  
  • 10mm Black Coro
  
  
  
  


• 32 Strands of Black Bullet Pixels - 50 Ct (4\" spacing). Two strands of 50 should be connected together per prop.


• Pixie8 Controller - Assembled -12V - With Black LOR Dangles Included

Optional Additions:

• 8 Pixel Extensions LOR connectors - 25ft - Black


• Cat5 Cable (50ft)

Not Included:

• Mounting material for home attachment


• Metal stakes or other ground mounting material

Our CPC packages can be used in a display with custom sequencing as long as the controller\'s Unit IDs do not conflict with any other Unit ID assignments on the network, and network limits have not been exceeded. To incorporate more than 8 Props into your custom sequenced display, visit our collection of Prop Packages so you can use the Pixie controller that best suits your needs.

Package Assembly

Pixels are not pre-pushed. Assembly is to be completed by the customer following the directions shipped with this package.

Mount the props to your home or in your yard using standard ground stakes and zip ties, PVC, or other mounting material of your choice.

What can your display look like with our CPC Packages? Take a look!

RGBPlus Sequences

To use the Swap a Prop Package with our RGBPlus Sequences, the Pixie8 controller in this package must be connected to the AuxA network on your computer or Net 2 of your N2-G4 or N4-G4 Showtime Director. The Pro license level is required to play RGBPlus sequences. The software version required is listed on each RGBPlus sequence purchase page.

The Pixie8 should be given a base Unit ID of 09; The eight Unit IDs for the eight ports of this Pixie8 controller (and therefore your props) must be 09, 0A, 0B, 0C, 0D, 0E, 0F, and 10, both physically on your controller and in your Preview, which correspond to ports 1, 2, 3, 4, 5, 6, 7, and 8 of your Pixie8. Learn how to set the Unit ID of your Pixie controller using DIP switches by clicking here.

Learn more about using these props with our RGBPlus Sequences and altering networks/Unit IDs by clicking here.

User Manual

View the manual for the Pixie Controller by clicking here.

Warranty

The 2 Year warranty applies to the controller board included in this package. All other components have a standard 1 Year warranty.